Product Description
A Series Short pitch Precision Simplex Roller Chains & Bush Chains
| ISO/ANSI/ DIN Chain No. |
China Chain No. |
Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
| Lmax mm |
Lcmax mm |
|||||||||||
| 15 | *03C | 4.7625 | 2.48 | 2.38 | 1.62 | 6.10 | 6.90 | 4.30 | 0.60 | 1.80/409 | 2.0 | 0.08 |
*Bush chain:d1 in the table indicates the external diameter of the bush
ROLLER CHAIN
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.
CONSTRUCTION OF THE CHAIN
Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CZPT which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.
The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.
LUBRICATION
Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]
There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.
Many oil-based lubricants attract dirt and other particles, eventually forming an CZPT paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.
VARIANTS DESIGN
Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.
Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.
Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.
USE
An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CZPT the bar.
Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CZPT flight, a system known as Thrust vectoring.
WEAR
The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).
With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.
The lengthening due to wear of a chain is calculated by the following formula:
M = the length of a number of links measured
S = the number of links measured
P = Pitch
In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.
CHAIN STRENGTH
The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.
The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.
CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Polishing |
| Samples: |
US$ 3/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can roller chains be used for power transmission in automotive applications?
Yes, roller chains can be used for power transmission in automotive applications. However, it’s important to note that roller chains are not commonly used as the primary method of power transmission in modern automotive systems. The automotive industry has largely transitioned to other technologies such as timing belts and gears for power transmission. Nevertheless, roller chains can still be found in some automotive components and systems. Here’s a detailed answer to the question:
1. Engine Timing: Roller chains are commonly used in internal combustion engines to drive the camshafts and synchronize the opening and closing of the engine’s valves. The timing chain ensures precise timing between the crankshaft and camshaft, allowing for efficient engine operation.
2. Transfer Cases: In certain four-wheel-drive and all-wheel-drive vehicles, roller chains are used in the transfer case to transmit power from the transmission to the front and rear axles. The roller chain in this application allows for smooth and efficient power transfer between the different drivetrain components.
3. Other Applications: While roller chains are not as prevalent in other automotive systems, they can be found in some secondary applications such as power steering systems, engine oil pumps, and accessory drives.
It’s important to consider the specific requirements of the automotive application when determining the suitability of a roller chain. Factors such as load capacity, speed, temperature, and environmental conditions need to be carefully evaluated. Additionally, regular maintenance and lubrication are crucial to ensure the longevity and reliable performance of the roller chain in automotive applications.
Can roller chains be used in underwater applications?
Roller chains are not typically recommended for direct use in underwater applications due to the potential for corrosion and water ingress. However, with appropriate modifications and additional protective measures, roller chains can be adapted for certain underwater applications. Here’s a detailed answer to the question:
1. Corrosion Resistance: In underwater environments, corrosion is a significant concern. Roller chains can be manufactured from corrosion-resistant materials such as stainless steel or coated with anti-corrosion treatments to mitigate the effects of exposure to water and moisture.
2. Sealing and Waterproofing: Special seals, O-rings, or protective covers can be installed to prevent water ingress into the chain’s internal components. These seals help to maintain lubrication and protect against corrosion, ensuring reliable operation even in wet conditions.
3. Lubrication Selection: Choosing the appropriate lubricant is crucial for underwater applications. Lubricants with excellent water resistance and corrosion protection properties should be selected to provide long-lasting lubrication in the submerged environment.
4. Maintenance and Inspection: Regular maintenance and inspection are essential to monitor the condition of the roller chain in underwater applications. This includes checking for signs of corrosion, lubricant degradation, or seal damage. Prompt replacement of worn or damaged components is necessary to prevent chain failure and ensure optimal performance.
It’s important to consult with experts or manufacturers experienced in underwater applications to determine the suitability of roller chains for specific underwater environments. They can provide guidance on the necessary modifications, materials, and maintenance practices to ensure the safe and reliable operation of roller chains in such conditions.
editor by CX 2023-09-13
China Belt Conveyor Rexnord Oil Hydraulic Coupler Torque Converter Drive Shaft Adapter Spline Flexible Motor Clutch Yox Fluid Coupling coupling connector
Warranty: 3 years
Applicable Industries: Creating Substance Stores, Manufacturing Plant, Machinery Fix Outlets, Vitality & Mining
Tailored assist: OEM, ODM, OBM
Composition: Common
Versatile or Rigid: Adaptable
Normal or Nonstandard: Nonstandard
Content: Metal
color: Customized
Packaging Information: Standard export wood box
Port: China Principal Port
Merchandise Description The hydraulic fluid coupling is a kind of hydraulic transmission device that utilizes the kinetic energy of the liquid to transmit vitality. It utilizes liquid oil as the operating medium, and transforms the mechanical power and the kinetic energy of the liquid via the pump wheel and turbine, so as to link the key mover and the operating machinery to comprehend electrical power transmission. In accordance to its application traits, hydraulic coupler can be divided into 3 fundamental kinds, specifically normal sort, torque limiting type, pace regulating type and 2 by-product sorts: hydraulic fluid coupling transmission system and hydraulic reducer. Fluid coupling is widely utilised in coal mine and ship hoisting and transportation equipment. It can make the transmission electricity of multiple motors exceed the stability, helps prevent the motor from idling, absorbs the vibration in the transmission system, prevents the motor from burning out, and extends the service lifestyle of transmission factors. Fluid couplings are primarily utilised in adaptable scraper conveyor, scraper device, belt conveyor, HYCNC 1.25m 2225671mm Cnc Router Gear Rack Pinion Helical Tooth Cnc Equipment Rack Low-cost Price Manufacturing unit Immediately Market coal plough, transfer device and belt conveyor. The Fluid coupling has easy structure and a collection of outstanding doing work characteristics. YOX variety pump wheel, housing, rear auxiliary chamber, driving joint, driven joint and elastic block are the driving parts, of which the elastic block is a adaptable part with distinct center values for payment and set up, and the turbine and turbine shaft form the driven partFunction of Fluid coupling1. Start off stably and decrease shock and vibration throughout procedure.2. Improve the motor capacity and decrease the influence present of the power grid.3. Overload safety, shield the motor and functioning device from hurt and burning due to overload.4. Shorten the length of current and help save energy.5. The load can be well balanced when several motors are linked in parallel.6. Hydraulic coupling factors have no mechanical use and long provider daily life
Types of Coupling
A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.
Flexible beam coupling
Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
Magnetic coupling
Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.
Shaft coupling
A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
Overload safety mechanical coupling
Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
CZPT Pulley
The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
editor by czh 2023-02-19
Chains Mesh Belt
if you are interested in our new catalogue of year 2019,
pls write to me so that I can send you for your reference by wetransfer.
Where is transmission necessary, there is YHK
Driving chain is our most broadly utilised merchandise in the industry. On-likely advancement and enhancements make it specially suitable for a extensive selection of assorted problems these kinds of as motorbike chain, high energy roller chain, galvanized chain, nickel-plated chain, Dacromet-plated chain, lubrication-cost-free chain and oil discipline chain. You can discover yhk conveyor chain utilized as escalator stage-chain, double additionally chain, palm oil chain, sugar mill chain, spreading device chain, dry oven chain, bulk materials conveyor chain, and much more. Every single incorporates substantial top quality materials, exact heat-treatment method, and quality assembly. yhk United states of america conveyor chain fulfills the global standard (ISO) and other advanced industrial normal (DIN, ANSI, BS).
YHK principal items: alloy metal roller chain, conveyor chain, agricultural chain, elevator chain, stainless steel chain, automobile chain, sprocket, CZPT Chain Belt, Engineered CZPTs Chain Xihu (West Lake) Dis., Snow Chain, Saw chain, Lifting Chain, Locking units, Timing pulleys, Synchronous Belt, V-Belt pulleys, Couplings, Rack&Gear, Mounted Ball CZPT Models, CZPTs, Reducer&Motor, bolts.
Merchandise presented by YHK are broadly used in railway, mine, oil, equipment, metallurgy, paper generating, textile, printing and dyeing, electricity, machine, chemical sector, health-related tools, aviation and other industries.
Specialist sales engineers and specialists offer expert item consultation and technical answer to remedy customer’s tough quickly and exact.
Comprehensive item group, you should see “Product Centre”–“Business Class”(PDF kind).
To develop outstanding worth for our buyers, shareholders, and associates is our objective.
Rubber shop made in China – replacement parts – in Santo Domingo Dominican Republic Timing Belt Synchronous Belts Auto Timing Belt S4.5m-617 630 653 675 711 with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Rubber Timing Belt Synchronous Belts Auto Timing Belt
S4.5m-617 630 653 675 711
MOULD LI EPT OF STS-S4.5M
| Sort | Pitch size | Teeth No | Width (mm) |
Variety | Pitch duration | Tooth No | Width (mm) |
Type | Pitch duration | Enamel No | Width (mm) |
| S4.5M-162 | 162 | 36 | one hundred fifty | S4.5M-333 | 333 | 74 | two hundred | S4.5M-504 | 504 | 112 | 450 |
| S4.5M-180 | one hundred eighty | forty | 150 | S4.5M-338 | 338 | 75 | 200 | S4.5M-518 | 518 | 115 | 450 |
| S4.5M-198 | 198 | forty four | one hundred fifty | S4.5M-347 | 347 | seventy seven | two hundred | S4.5M-558 | 558 | 124 | 450 |
| S4.5M-203 | 203 | 45 | a hundred and fifty | S4.5M-351 | 351 | 78 | two hundred | S4.5M-612 | 612 | 136 | 450 |
| S4.5M-225 | 225 | 50 | two hundred | S4.5M-360 | 360 | 80 | 200 | S4.5M-617 | 617 | 137 | 450 |
| S4.5M-239 | 239 | 53 | two hundred | S4.5M-369 | 369 | eighty two | 450 | S4.5M-630 | 630 | 140 | 450 |
| S4.5M-252 | 252 | 56 | two hundred | S4.5M-378 | 378 | 84 | 450 | S4.5M-653 | 653 | 145 | 450 |
| S4.5M-275 | 275 | 61 | 200 | S4.5M-396 | 396 | 88 | 450 | S4.5M-801 | 801 | 178 | 450 |
| S4.5M-279 | 279 | sixty two | two hundred | S4.5M-414 | 414 | ninety two | 450 | S4.5M-864 | 864 | 192 | 450 |
| S4.5M-284 | 284 | sixty three | 200 | S4.5M-450 | 450 | a hundred | 450 | S4.5M-905 | 905 | 201 | 450 |
| S4.5M-297 | 297 | 66 | two hundred | S4.5M-468 | 468 | 104 | 450 | S4.5M-932 | 932 | 207 | 450 |
| S4.5M-315 | 315 | 70 | 200 | S4.5M-491 | 491 | 109 | 450 | S4.5M-1800 | 1800 | 400 | 380 |
| S4.5M-329 | 329 | seventy three | two hundred | S4.5M-five hundred | five hundred | 111 | 450 |
Our Business:
HangZhou Huixin Synchronous Belt Co., Ltd. covers an region of 20 thousand sqm with a more investment decision of twenty million Yuan RMB. It owns world’s sophisticated belt & pulley manufacturing gadget. It organizes manufacture according to the mo EPT ideal production technique mo EPT superb raw materia EPT & auxiliary materials and by adopting nationwide common, global standards and overseas innovative criterion. At present we have a lot more than thirty mode EPT and 2000 requirements. The goods sell to 30 domestic provinces, cities, autonomous regions, 1000’s of consumers & models, and also export to The united states, Europe, southea EPT Asia and so on foreign international locations.
The company persists in the function of “prosper enterprise by large-tech”. It carries ahead Huixin spirits of “company & indomitable, developing & progressive, be daring in obtaining very first-course”. It wholeheartedly serves broad consumers by its fine EPT high quality, affordable cost and excellent provider.
Goods Sort
1. T type tooth industrial rubber synchronous belt
| Sort | Pitch | Tooth peak | Belt thickness | Angle |
| MXL | two.032 | .fifty one | 1.fourteen | forty |
| XXL | three.175 | .76 | 1.52 | fifty |
| XL | five.080 | one.27 | two.thirty | 50 |
| L | 9.525 | one.91 | 3.60 | 40 |
| H | twelve.70 | 2.29 | four.thirty | forty |
| XH | 22.225 | 6.35 | 11.twenty | 40 |
| XXH | 31.750 | nine.fifty three | 15.70 | 40 |
| T2.five | two.5 | .seven | one.thirty | forty |
| T5 | 5 | one.two | two.twenty | forty |
| T10 | 10 | two.50 | four.50 | 40 |
| T20 | twenty | five.00 | eight.00 | 40 |
| AT5 | five | one.20 | two.70 | 50 |
| AT10 | ten | two.50 | five.00 | 50 |
| AT20 | twenty | five.00 | eight.00 | fifty |
two. Arc tooth industrial rubber synchronous belt
| Gear code | Sort | Pitch | Tooth top | Belt thickness |
| HTD | 3M | 3 | one.22 | 2.40 |
| 5M | five | 2.06 | three.80 | |
| 8M | 8 | three.36 | 6.00 | |
| 14M | 14 | 6.02 | 10.00 | |
| 20M | twenty | eight.forty | thirteen.20 | |
| STPD/STS | S2M | two | .seventy six | 1.36 |
| S3M | three | 1.14 | 1.ninety | |
| S4.5M | 4.five | one.seventy one | two.81 | |
| S5M | five | 1.91 | three.40 | |
| S8M | 8 | 3.05 | 5.30 | |
| S14M | 14 | five.thirty | 10.twenty | |
| RPP/HPPD | P2M | 2 | .76 | 1.36 |
| P3M | 3 | 1.fifteen | 1.ninety | |
| P5M | 5 | 1.ninety five | three.fifty | |
| P8M | 8 | three.twenty | five.50 | |
| P14M | 14 | 6.00 | ten. |
Raw supplies
1.Belt:neoprene (CR) as the primary raw materia EPT (imported from Japan)
two.Skeleton materials:glass fiber (imported from Japan)
three.Tooth floor: nylon 66 higher spandex
Characteristics:
1.Anti-cracking houses
two.Ozone excellent efficiency
three.Anti-aging
four.Warmth resistance
5.Oil resistance
six.Abrasion-resistant
7.Modest first tension
8.Precise transmission ratio and with no slip
Features:
one.With synchronous belt travel is the use of tooth and tooth meshing with the impetus to pass a new type of transmission manner
2.With precise synchronous transmission purpose, do not beed lubrication and so slip,no pollution, considerably less sound, transmission effectiveness of .98, the pace ratio assortment up to 1.ten, permitting wire pace up to 50/seconds, the transmission charge from several hundred watts to the hundreds of kilowatts, ideal for multiple axis generate
Our Services
* Inquiry and consulting support. * Sample tests assist
* View our Factory. * Services following revenue
* Fa EPT Shipping * Reputable cargo
Include: No.288, Shengshan Street(west), Shengshan Town, HangZhou City, ZHangZhoug, China
Tel: +86~571-8822571/8822 0571 -63542128
Cellular: 155718571
For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first gear manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the detailed substitution elements contained herein are not sponsored, authorized, or produced by the OEM.
20 Cost made in China – replacement parts – in Samut Prakan Thailand Teeth 6mm Belt Width 8mm Bore Gt3 Timing Pulleys with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Brand name: E&B HUIXIN
| Spot of Origin: | HangZhou HangZhou (Mainland) |
| Product: | MXL XL L H XH XXH T2.5 T5 T10 T20 AT5 AT10 AT20 3M 5M 8M 14M 20M S2M S3M S4.5M S5M S8M S14M P5M P8M P14M and many others and EPT specific versions |
| Content: | Stainless Steel, Brass/Copper, Aluminum, POM, and EPT regular machineable material. |
| Module: | 7-160mm, Max.Diameter:1400mm. |
| Grade: | Can up to GB8, ISO8, JIS4, AGMA8, DIN8. |
| Packing: | Export normal Quality Cartons (With Pallet) |
| Payment: | thirty% TT in Progress, equilibrium just before delivery |
| Shipping and delivery | About 7 Days right after acquiring thirty% T/T payment in advance |
| Area Remedy: | Anodized, Tough Anodized, Zinc plated, blackening therapy |
| Inspection: | All products are checked and examined thoroughly throughout every single operating method and right after the item is ultimately made to make sure that be EPT top quality merchandise goes out in the marketplace. |
Relevant industry: Electro-machinery, Textile Machinery, Ad printing equipment, Food Packaging, CNC equipment, Instrumentation, tobacco and so on
Arc tooth Timing tooth
| Kind | Pb | Ht | R | S | r | Angle |
| 3M | 3 | 1.28 | .ninety one | one.90 | .26~.35 | ≈14° |
| 5M | five | two.sixteen | one.56 | 3.25 | .48~.52 | ≈14° |
| 8M | eight | 3.54 | 2.fifty seven | five.35 | .seventy eight~.eighty four | ≈14° |
| 14M | 14 | 6.20 | 4.sixty five | nine.eighty | 1.36~1.50 | ≈14° |
| 20M | 20 | eight.sixty | 6.84 | fourteen.80 | one.ninety five~2.25 | ≈14° |
Dimension of T variety/linear kind pulley
| Variety | Bw | hg | Φ+1.5° | rb | rt | 2β |
| MXL | .85±0.05 | .sixty nine | twenty | .35 | .thirteen | .508 |
| XXL | one.14±0.05 | .84 | twenty five | .35 | .thirty | .508 |
| XL | 1.32±0.05 | one.sixty five | twenty five | .41 | .sixty four | .508 |
| L | 3.05±0.ten | 2.67 | twenty | one.19 | 1.seventeen | .762 |
| H | four.19±0.13 | three.05 | 20 | one.sixty | one.sixty | 1.372 |
| XH | 7.90±0.fifteen | 7.fourteen | twenty | 1.ninety eight | 2.39 | 2.794 |
| XXH | twelve.17±0.eighteen |
Observe when checking from and get pulley,
one. Belt and pulley of our business can be connected or changed by imported belt and pulley
2. You should offer drawing when you order. We can also attract for you if you can explain to us the
Material, enamel type, teeth quantity, belt width or enamel width, bore, Threaded hole or
Thru-gap,crucial and EPT measurement you require
3. We can also customise non-regular products for consumers
4. Tolerance: conform to clients requirment
five. EPT services: orrered
six. If you need samples, make sure you contect us. About the sample charge, we can consult it.
Representation OF PULLEY
Contect Us:
Include: No.288, Shengshan Highway(west), Shengshan City, HangZhou Town, ZHangZhoug, China
Tel: +86~571-8822571/8822 0571 -63542128
Cellular: 155718571
For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original equipment manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the detailed substitute components contained herein are not sponsored, authorized, or produced by the OEM.
Hairise made in China – replacement parts – in Bursa Turkey Brown Color Har2120 Flat Type Conveyor Belt with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Products Description:
| Name | Har-2120 Flat Type Belt |
| Brand Name | Hairise |
| Biz Type | Manufacturer/Factory |
| Pitch | 12.7mm |
| Thickness | 8.7mm |
| Open-rate | 0% |
| Feature | Heat Resistant |
| Shipping Port | ZheJiang ,China |
| Certification | ISO,CE,FDA |
| Belt material | POM/PP/PE |
| Dimension | Customized |
| Color | White/Grey/Blue or as your required |
| Package | Wooden box/Carton box |
| Produce time | 3-7 working days after getting payment |
| Warranty | 6 months |
Advantages of the EPT item:
1 this modular conveyor belt are convenient to assembly and maintain
2.All color could be available
2.this modular conveyor belt can bear High mechanical strength
3.this modular conveyor belt has EPT product handling performance
4. this modular conveyor belt are wear resistance and Oil Resistant
5.we are professional conveyor system manufacturer,our product line contain: modular belt, slat top chain, conveyor spare parts, conveyor system.
6.we can provide good after-sale service.
7.every products can be customized
Application:
Bakery,Dairy,Fruit and Vegetable
We have extensive experience in developing specialized solutions tailored to the needs of many different Bakery industry segments: bread and bun, fresh pastry (oven and fried pastry), pizza, pasta (fresh and dry), frozen bread, frozen pastry, cookies, and crackers,with our material handling equipment conveyor systems conveyor plastic modular belt conveyor you can get surprise!
Meat Poultry Seafood
With belts and accessories designed to meet the specific needs of fruit and vegetable processing and packaging applications, EPT is committed to helping customers achieve their operational and business goals.
EPT continues to develop new and better ways for customers to increase throughput efficiency, improve sanitation, and reduce the costs of belt ownership.
Material handling equipment conveyor systems conveyor plastic modular belt conveyor technology to meet the specific challenges of seafood processors.
Ready Meals
Ready meal customers who equip their lines with EPT Industrial plastic slat table top food grade conveyor chain realize many critical benefits, including:
·Reduced sanitation costs and improved food safety
·Improved line efficiency and maintain product alignment
·Reduced unscheduled downtime and reduced labor needs
Products Show:
Main products :
| Items | Slat top chain:flexible chain,multiflex conveyor chain, plastic slat top chain,steel table top chain
Plastic modular belt EPT systems:Chain conveyor,chain network conveyor,metal mesh conveyor,roller conveyor,belt conveyor,upgrade conveyor,screw conveyor |
| Material | Steel:Stainless steel/Carton steel Plastic:PU/PE/POM/PVC Rubber Aluminium |
| Color | As your required (white,blue,yellow,green,red,white grey,clear) |
| State of supply | Stock or fa EPT supplier (Generally,within 7 working days) |
| Origin | China |
| Certification | ISO,CE,FDA (accept your required) |
| Grade | Top |
| Business type | Factory |
| Deliver time | Generally,within 7 working days |
| Transportation | FCL, LCL,ship, air, Express, train ,bulk (or as your required) |
| Package | Wooden/Box/Carton/KD/Fixed/Tablet |
| Term | EXW/FOB/C&F/CIF/DDU (AS YOUR REQUIRED) |
| Application | 1.foods,soft drinks applications 2.packaging manufacturing 3.pulses and granular products 4.various dip tank applications 5.tobacco,medicine and chemical industry 6.beverage and beer factory 7.electronics.automobiles and logistics,ect 8. EPT fields related to plastic modular belt. |
Company Profile:
Why choose Us:
Mu Jia strives to be its customers’ be EPT long-term partner for conveying solutions. We have been in conveyor system,material handling equipment conveyor systems conveyor plastic modular belt conveyor,plastic top chain field for 13 years,we believe we are very professional manufacturer of material handling equipment conveyor systems conveyor plastic modular belt conveyor.For 13 years, EPT has been known for ethical and responsible business practices. We value this reputation.We believed that great companies are built on doing the right thing each and every day, and treating customers, employees, and suppliers honestly, fairly, and with respect. These principles are reflected in All-Ka’s business philosophy. We aim to practice these every single day, for the benefit of our customers.
We have independent research and development department.
EPT material handling equipment conveyor systems conveyor plastic modular belt conveyor is the pioneer of hygienic conveyance solutions, modular belt and continues to be the only global company that provides comprehensive, industry-specific solutions.
Our engineer from Tsinghua University,we design conveyor system,material handling equipment conveyor systems conveyor plastic modular belt conveyor,conveyor parts by ourselves.
Our goal is to fight food safety risks through ongoing, extensive in-house and field research.
Certification
We can privide diffrient certificate for you,and can offer te EPT certificate as your requirement.
ISO/CE/FDA/THE CNAS/THE SGS/Our patent provide
FAQ:
1.Where is your company located? How can I visit there?
All our clients, from home or abroad, are warmly welcomed to visit us, Before you visit our company, we can connect by phone ! Our company is located in ZheJiang , China, near the ZheJiang Xihu (We EPT Lake) Dis.ao International Airport.
2.I don’t know what belt I currently use. Can you help me identify my belt?
Our online belt identifier can help you narrow down the series and style of your current belt. If you need more specific information onmaterial handling equipment conveyor systems conveyor plastic modular belt conveyor , contact me freely for any material handling equipment conveyor systems conveyor plastic modular belt conveyor.
3.What can you do If the products were broken?
(1.)If goods were broken once you bought from me,I would replace them freely for material handling equipment conveyor systems conveyor plastic modular belt conveyor .
(2.)If the goods were broken when you used,We could provide 1 year quality guarantee for material handling equipment conveyor systems conveyor plastic modular belt conveyor under common working environment.
4.Does EPT provide PDF files of products?
Yes, in our download center you can find PDF files for a large number of our products.
If you can not find what you are looking for ,send me your reque EPT by email.
Contact Us Maybe:
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
Wear made in China – replacement parts – in Faisalabad Pakistan Resistant Conveyor Belting Conveyor Belt for Quarry with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
ZheJiang Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.
SR Belting always strives to assure the safety of conveyor belt to meet and exceed beyond the national standards and customers satisfactions with its products. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.
SR Belting manufactures conveyor belts based on customers’ requirements as Global ISO, German DIN, SANS and RMA etc.
We have a independent design, research and development capabilities and can be customized to customer requirement.
Our company possesses a complete set of detection equipment, the independent chemical analysis and physical labs, ensuring all the raw materia EPT to provide excellent quality products.
We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.
Our partners: CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG
Wear Resistant EPT Belting EPT Belt for Quarry
EX.Production Specification:
EP200*4Ply, BW1200×(5+2) 25Mpa
Production description:
EPT belt for handling of mine, width is 1200mm, the quantity of canvas is 4 ply, with the wrap(length of the case) made of polyester(E) and the weave (transversal case fabric) made of nylon(P), impact and cutting strength > 50N/mm, tensile strength ≥25N/mm2, minimum break elongation is ≥ 400%, and the hardness is 60+/-5 shore a, top cover thickness is 5mm, the bottom cover thickness is 2mm, excellent abrasion resistance (loss from abrasion 90mm3 or less), with molded edges, adhension between fabric and fabric ≥ 5N/mm, adhension between fabric and rubber ≥ 4.5N/mm, continuous running temperature is up to 40ºC-80ºC.
Cover Grade:
• EPT Light Duty Service
Common References: DIN-Z is very economical for moderately abrasive to conveyor small size materials.
•Medium Abrasion Resistance
Common Reference: DIN-Y, DIN-N, RMA 2, AS-N are for moderate abrasion resistance applications, mostly
above ground. Regularly used for transportation of Coal, crushed ores, limestone, sand, cements etc.
•High Abrasion Resistance
Common Reference: DIN-X, DIN-M, RMA1, AS-M are excellent abrasion resistance again EPT cutting, impact,
heavy rocks, sharp stones.
•Super Abrasion Resistance
Common Reference: DIN-W is used in extremely abrasive applications such as Copper & ore, sinter, coke. It
provides high resistance without increasing cover thickness and weight of the belt.
Oil resistance(OR) & Moderately Oil resistance(MOR): used for transportation of specific materia EPT with high /
moderate concentration of animal or vegetable fats. The sprcial compound is maxed in the covers to avoid
damage/swelling of belt.
Application:
Advantage:
•The rugged, fabric-reinforced conveyor belt withstands high abuse applications
• EPT impact resistance
•Dual layer twill weave fabric improves load tearing and impact resistance
•High transverse tear resistance
•Superior rip resistance
•Low elongation for long distance at high speed
•Exceptional stability under high temperature
Specification:
Can be customized accroding to customers’ requirement.
Our packing:
There is a variety of packing solutions we can offer, and also be customized according to your requirements.
EPT belts we offer:
| 1)Multiply Fabric EPT Belt | 7)Pipe EPT Belt |
| 2)Steel Cord EPT Belt | 8)Chevron EPT Belt |
| 3)Heat Resistant EPT Belt | 9) EPT EPT Belt |
| 4)Anti-Burning EPT Belt | 10)Oil and Fat Resistant EPT Belt |
| 5)Flame Resistant EPT Belt | 11)Aramid EPT Belt |
| 6)Corrugated Sidewall EPT Belt | 12)Light Duty EPT Belt |
SR Belting Business FAQ
Q:What is your production capacity?
A:SR Belting has 11 production lines and its capacity is 5000meters per day.
Q:How about your lead time?
A: It is 20 ~ 25days for regular belts.
Q: What is your M.O.Q ?
A: M.O.Q is 1*20GP. The less quantity is ok but its co EPT will be higher.
Q: Do you have belt warranty?
A: At lea EPT 12months service life for regular belt. HR T4+ belt 3~6month.
Q: What certificates do you have ?
A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
Best made in China – replacement parts – Chain & sprocket manufacturer : Hairise 16b chain equivalent China in Santo Domingo Dominican Republic 2120 Conveyor Plastic Belt Used in Corrugated Paper Industry with ce certificate top quality low price
We – EPG Group the greatest Chain and agricultural gearbox factory in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
The solution effectively shows environmental safety and power preserving. ISO Additionally, all our creation methods are in compliance with ISO9002 specifications for a specialized supplier of a entire assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….9001:2000 certified. Stocking distributor of electricity transmission merchandise which includes roller & several strand roller chains. Goods also include brakes, travel parts, gears, torque limiters, U-joints, pulleys, sheaves, encoders, belt drives, clutches & motors are also available. assistance needed. Organization Profile
Mu Jia EPT Technological innovation(ZheJiang ) Co. Ltd.
Mu-Jia is an built-in firm engaged in the R&D, manufacture and sale of slat top chain,modular belt,conveyor system and EPT relevant parts almo EPT twenty several years. Insisting on the operation basic principle of “Top quality Dependent and Provider Initial”, our business has received a high status via several years of development. We also cooperate with some effectively-recognized domestic and abroad enterprises.
Our head workplace situated in ZheJiang ,new manufacturing facility found in ZheJiang province,handles an regions of fifteen,000 sq. meter,there are three principal properties:workplace constructing,conveyor assembly workshop and production workshop.A lot more than 10 machines for producing,several hundreds of item method EPT for meeting client variety specifications.Our principal goods are modular belt,slat leading chain,flexible chain,conveyor system,comb,rail,sprocket and EPT conveyor associated elements.They are extensively utilized in foodstuff, comfortable drink, packaging & producing, tobacco, medicine & chemical, electronics, Automobile: +86~13083988828s and logistics industries.
Items Introduction
Plastic EPT Belt with Food and drug administration
Our merchandise use POM materials so our merchandise are use resistant and resistant to warmth and so on. They are mostly utilised in the pursuing facets:
In beverage market palletizes, depolarizers, washers, labelers, fillers, pasteurizers, incliners, out feeds, elevators and accumulation tables are geared up with slat band chains, curves, sprockets, belts, leveling factors and many more conveyor elements.
For the container producing industry special items and materia EPT are available, these kinds of as abrasion resistant polyamide for glass crops, vacuum chains for can creating and gripper chains for vertical transportation.
In automotive market the merchandise are engineered to meet the mo EPT demanding applications, this kind of as rubber processing and tire handling.
The detailed size can be accessible as your need, as a result as long as you give me the drawing or detailed specification, every little thing is all right. So Mu-Jia has the merchandise to match any customer prerequisite.
Functions and Advantages:
1) Reduced friction
two)Higher performance
three)StHangZhourd width and personalized length
four)Custom-made coloration
5)Various varieties fit distinct chain conveyor line
six)Straightforward maintenance
seven)High speed with massive conveying capability
Merchandise Parameters
| Identify | Har2120 Sequence Modular Belt | Shade | Blue,Gray,White |
| Pitch | twelve.7mm | Materials | POM,PP,Nylon |
| Excess weight | eight-16kg/sqm | Operate Temp | -40°c ~+135°c |
| Width | Custom-made | EPT Potential | 500sqm/month |
| Length | Tailored | OEM | Accepted |
Item Detai EPT Display
Why Decide on Us
Merchandise Processing
Items Packing
EPT Primary Products
1)modular belt
2)slat best chain
3)sprocket
four)conveyor system
5)versatile chain conveyor system
6)use strip
7)supports
8)gripper
We produce all mo EPT each conveyor accessories.Any related necessary,get in touch with us freely.Thanks in progress!
Speak to us freely
The use of original gear manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the outlined substitution areas contained herein are not sponsored, authorized, or created by the OEM.
Timing Cheap made in China – replacement parts – in Brazzaville Congo Belt Tensioner Pulley 25286-2b010 for Hyundai KIA with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Matter | Timing Belt Tensioner Pulley 25286-2B571 for EPT Kia |
| Merchandise Identify | tensioner pulley |
| Portion quantity | 25286-2B571 |
| Car Design | for hyundai kia |
| Materials | alloy |
| MOQ | 20pcs |
| Warranty | six months |
| Value term | EXW HangZhou |
| Package deal | white box |
| Payment | T/T, Western Union, Paypal |
| Shipping time | tiny buy about 3-7 days,massive purchase about 15-30 times |
| Shipping Way | Convey like DHL/Airline/Sea/Land transportation |
| Sea Port | Hongkong |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique gear manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown substitute areas contained herein are not sponsored, authorized, or made by the OEM.
Best made in China – replacement parts – pintle Chain & sprocket manufacturer : T-400 sprocket for roller chain in Conakry Guinea Plastic Conveyor Belt with Baffle with ce certificate top quality low price
We – EPG Group the greatest Chain and agricultural gearbox factory in China with 5 different branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
We provide OEM provider. Common EPG has been effectively accredited by ISO9002 Quality Management Program, ISO9001 Top quality Administration Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement management program. one-strand roller chain, standardized by ASME, is an assembly of alternating pin backlinks and roller backlinks. The length between pin centers is named the pitch. The pitch is what categorizes the dimension of the chain. The greater the pitch, the increased the load rating. Chains with small pitches have more compact masses, run far more quietly, and at larger speeds. Multi-strand, little-pitch roller chains are a excellent resolution for higher-load, higher-pace programs. Normal strands have an even amount of pitches, pin hyperlinks, and roller backlinks. A roller chain strand can be shortened by getting rid of backlinks and lengthened by adding total or a half hyperlinks (offset hyperlinks).
T-four hundred Plastic EPT Belt with Baffle
Mat: Pom Work Load : 5840N/M
Pin mat: Pom Work temp: +1°c ~+98°c
Open spot: % Color: Coffe , Blue
Main application: Sterilization machine, Food and beverage sector,this sort of as transportation of bottles,cans and so on.
Primary software: Food and beverage sector,such as transportation of bottles,cans etc.
Packaging:
Interior packing :pack in paper box
Out packing: Cartons or wood pallet
Suitable for sea and inland cargo
As customers’ reque EPT
The use of first gear manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the listed replacement components contained herein are not sponsored, approved, or made by the OEM.